Back to Overview

How to deal with the alarm of the punch feeding machine system?

Sep 10,2025

How to deal with the alarm of the punch feeding machine system?

In daily production, there are various types of feeders with a wide range of applications. We will encounter different problems in production. Why do we start using a good feeder.

This can greatly improve the efficiency of stamping production. If used improperly, maintenance is not paid attention to, or operators lack understanding of the equipment. It can lead to frequent equipment failures, abnormalities, machine alarms, and other issues, so we need to maintain the equipment during the production process. Additionally, how can we better address and handle equipment malfunctions and issues when they occur?

1、 The release device of the punch press feeder is not smooth. Solution for alarm situation:

1. Check if there is any displacement in the direction of the punch feeding machine, then check if the transmission direction is correct and if there are any abnormalities in the punch and die.

2. Check if the punching die has an inner guide pin, carefully inspect for any problems, and promptly eliminate them.

3. Check if the eccentric shaft and loosening shaft of the punch feeder are stuck due to oil leakage. Use kerosene and add butter.

2、 Handling method for feeding position deviation alarm of feeder:

When the mold positioning needle enters one-third of the material hole position, use a release device to release the auxiliary alignment.

2. Check if the mold and feeder mounting plate form a 90 ° vertical angle;

3. Re calibrate the feeding roller;

4. Check if the materials are aligned during feeding;

3、 The handling method for the alarm situation caused by irregular errors in the punching machine feeding machine:

1. Whether the feeding mechanism used belongs to pneumatic loosening. If it belongs to pneumatic loosening, check whether the pressure of the air compressor is normal.

2. Check whether the coil of the material rack feeding is on the same horizontal line as the feeding machine and mold.

3. Check whether the pressure on the pressure plate is uniform. If it is uneven, adjust the pressure of the release device.

The above is the method for handling faults or system alarms in the punch press feeding machine system, so that the feeding machine can better maintain and use the equipment during the production process.

Hot Tags:

Contact Us

E-mail:
gsw@chfeeder.com

Phone/WhatsApp:
+86-13751226330

Address:
Jiangnan Village, Gaoqiao Town, Haishu District,
Ningbo City, Zhejiang Province

Request Quote

If you have found your desired products or want to design your exclusive products, please feel free to contact, we are here for you 24/8.

Submit